Can 2540 and 4040 Series Reverse Osmosis (RO)
Best-in-Class Commercial Reverse Osmosis System
Our CAN 2540 and 4040 RO Series are affordable commercial reverse osmosis systems for applications up to 20,000 gallons per day and remove up to 98% of total dissolved solids in raw feed water.** Both systems include a 5-micron sediment pre-filter.
Commercial applications for the Can 2540 and 4040 include:
- Spot-free rinse
- Greenhouses, research and medical labs
- Humidification and process make-up water
- Ice making, bottled water, and food & beverage processing
Previous
Next
Key Features
Permeate flow rate of 600USGPD to 20,000 USGPD*
Recovery Rate:* 50-75%
Salt Rejection Rate: > 98%
Optional Features: 304 stainless steel or epoxy powder coated carbon steel frames, TDS monitor, high rejection or Nano membranes, stainless steel pump
* The maximum permeate flow as defined by the membrane specifications and the feed water conditions of 2,000 ppm NaCI, 77 deg. F 200 psi operating to atmosphere.
** TDS rejection and water recovery are variable and can be effected by temperature and feed water conditions.
Certifications
NSF 61 High Density Polyethylene Tubing. Membranes are Tested and Certied by NSF International against NSF/ANSI Standard 61 for material requirements only.
- Operating pressure: 110-150 psig (7.6-10.3 bar)
- Minimum inlet pressure: 30 psig (2.1 bar)
- Operating temperature: 33 - 100° F to 1-38 °C
- Nominal recovery: 50 - 75%
- Nominal salt rejection: >98%
- Frame: Epoxy powder coated carbon steel (optional 304 stainless steel)
- Industrial Nema rated control box
- Membranes: Tested and Certied by NSF International against NSF/ANSI Standard 61 for material requirements only.
- Membrane Housings: 304SS
- Piping: Sch 80 PVC, Brass, Stainless Steel
- Tubing: NSF 61 High Density Polyethylene
- Electronic controller with indicator for tank full, low pressure, pre-treatment lock out, flushing, and processing
- Unit on / off switch
- Large capacity 20” BB 5-micron sediment pre-filter
- Automatic inlet shut-off valve with air purge on start up
- Automatic feed water flush
- Liquid filled pre-filter, post-filter, and membrane pressure gauges
- Product, waste, and recycle flow meters
- Stainless steel flow control valves
- Low pressure pump protection
- Pump throttle valve
- Optional Features
- Stainless steel pump
- S-100, S-150 Controllers
- Permeate water flush
- TDS monitor
- High rejection or Nano membranes
- 304 Stainless Steel Frame
- Pump: Multi-Stage Centrifugal
- Motor: ODP, 115 / 230 VAC, 1-phase, 60 Hz
Get Your Free Custom CAN 2540 and 4040 Series RO Specifications Today
CAN 2540 and 4040 Series RO System Spec Chart
Other Products
